CYBEX 8800 Owner's And Service Manual page 21

Chin-Up Bar
Insert
plug
Figure 7
C. Remove insert plug to gain access to BHSCS securing Chin-Up Bar. See Figure 7.
is not shipped with Chin up bar (attached refer to step 13).
D. Repeat step 10C for insert plug on opposite side.
E. Locate BHSCS on top of frame near pulley. See Figure 8
Locknut
Figure 8
F. Using a 7/32" Allen wrench remove two BHSCS securing Chin-Up
Bar
G. Using a 7/32" Allen wrench and socket remove two BHSCS secur-
ing Chin-Up Bar.
H. Repeat step 10E and 10F for opposite side
I. Carefully remove Chin-Up Bar and set aside.
J. With an assistant remove 4 (of 8) BHSCS securing frame halves
See Figure 9.
K. Move to desired location.
L. Place both halves of frame together and tightly secure the four
BHSCS removed in step 10J.
M. Place a drop of 242 Loctite on BHSCS and threaded hole removed
in step 10J.
Product Number 8800/8810 Owner's Manual
BHSCS
BHSCS
Insert
plug
.
BHSCS
Figure 9
NOTE: 8810
Assembly
Page 4-5