Sata Cabling To Sata Raid Controller - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Hard disk drives
7.2.6

SATA cabling to SATA RAID controller

Figure 52: Connecting SATA cable to RAID controller
Ê Connect the SATA cable to connector MLC1 of the SATA RAID controller.
Ê Install the SATA RAID controller in slot 3 as described in section
cards and backup units" on page
Figure 53: Connecting SATA cables to HDD 1/2
Ê Connect the SATA cable connector P1 to HDD 1 (1). See
page 329.
Ê Connect the SATA cable connector P2 to HDD 2 (2). See
page 329.
116
147.
Upgrade and Maintenance Manual
"Expansion
figure 227 on
figure 227 on
TX100 S3