Fujitsu M4099D Operator's Manual page 94

3. Press .
ENTER
The option select screen appears with the
current setting OFF blinking (blinking indicates
"changeable").
4. Press or
The displayed option changes (ON blinks).
5. Press to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Setup Mode Lock).
6. To quit the <<SETUP MODE>>, turn off the
power.
Black background
This function is set to ON when the "Black Background" is mounted on the scanner. After mounting
the "Black Background", set this function to ON and adjust the gain of the amplifier by the "Amp Gain
Adjustment" in the test mode.
NOTE (Image Quality):
The quality of the scanned image becomes low when the "Black Background" function is set to ON
without mounting the "Black Background".
NOTE
You cannot use this function when the setup mode is brought by pressing
status.
LCD display
Black Background
The following is an example of operation when you change the setting.
.
Options
Front: On, Off (Default: Off)
Back: On, Off (Default: Off)
Setup Mode Lock
OFF
Setup Mode Lock
ON
<<SETUP MODE>>
Setup Mode Lock
MENU
Remarks
in the Ready
6-49