Fujitsu M4099D Operator's Manual page 46

Setup, Browse, and Test Modes
This scanner has the setup mode, browse mode, and test mode to ease setting up.
• Setup mode for customizing the scanner for user requirements
• Browse mode for glancing setup conditions of the scanner
• Test mode for testing the scanner offline
There are two ways to enter these modes:
• Way 1
Press when the LCD indicates "Ready".
MENU
You can use the setup mode and browse mode. To quit a mode, press
• Way 2
Turn the power on while pressing
You can use the test mode in addition to the setup mode and browse mode. To quit a mode, turn
off the power.
Available functions differ with modes or with ways. For details, see descriptions of each function.
Functions not available in setup mode
Way
pressed in Ready status
MENU
Power on with pressed
MENU
Functions not available in browse mode
Functions not available
Paper thickness setup
.
MENU
Functions not available
Interface, TP_IF baud rate, RS232C baud rate, SCSI ID, Product ID, Function key, Setup
mode lock, Black background
Settings
.
CANCEL
6-1