Fujitsu M4099D Operator's Manual page 77

Interface
This function sets the host interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
status.
LCD display
Interface
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Interface" ap-
pears in the lower line of the menu screen.
3. Press
ENTER
The option select screen appears with the
current setting AUTO blinking (blinking
indicates "changeable").
6-32
Options
Auto, SCSI, Video, TP_IF (Default: Auto)
.
MENU
Remarks
Auto: The scanner automatically detects the
interface through which a host
computer issues a command.
TP_IF: Third party's interface
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Interface
Interface
AUTO
in the Ready