Configuration Utility - HP Compaq nc6220 Quickspecs
Notebook pc
Hide thumbs
Also See for Compaq nc6220:
- Hardware and software manual (246 pages) ,
- Maintenance and service manual (229 pages) ,
- Getting started (74 pages)
Advertisement
QuickSpecs
Technical Specifications
Broadcom 4311AG
802.11a/b/g WiFi Adapter
4
Configuration Utility
1.
Check latest software/driver release for updates on supported security features.
2.
Maximum output power may vary by country according to local regulations.
3.
Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modulation) and a
packet error rate of 10% for 802.11a/g (OFDM modulation).
4.
WLAN supplier's client utility is required for Cisco Compatible Extensions support. WLAN may also be
compatible with certain third-party software supplicants.
Wireless LAN Standards
Interoperability
Frequency Band
Data Rates
Modulation
1
Security
Sub-channels
Media Access Protocol
Network Architecture
Models
Roaming
2
Output Power (for CKK)
Output Power (for OFDM;
2
power varies by data rate)
Power Consumption
Power Management
3
Receiver Sensitivity
DA - 12130 North America — Version 28 — September 6, 2006
HP Compaq nc6220/nc6230 Notebook PCs
Choice of Configuration Utility:
Microsoft Windows XP Wireless Network Connection Manager
Broadcom Wireless Configuration Utility (required for Cisco Compatible
Extensions support)
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
Wi-Fi certified
Cisco Compatible Extensions Program compliant
(details at
www.hp.com/go/notebooks/WLAN)
2.4 GHz and 5 GHz
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Direct Sequence Spread Spectrum
DBPSK, DQPSK, CCK, OFDM
Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES,
802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2,
LEAP, EAP-FAST, EAP-SIM.
Support for Cisco Security Features (proven compatibility with Cisco Aironet
infrastructure products through the Cisco Compatible Extensions Program
Version 4).
Multinational support with frequency bands and channels compliant to local
regulations.
CSMA/CA (Collision Avoidance) with ACK
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
IEEE 802.11 compliant roaming between access points
17.5 dBm
15 dBm
Transmit: 2.0 W (max)
Receive: 1.5 W (max)
Idle mode: 390 mW (nominal)
Sleep mode: 20 mW (max)
ACPI compliant power management
802.11 compliant power saving mode
54 Mbps: -72 dBm, 11 Mbps: -88 dBm , 1 Mbps: -97 dBm
Page 34
Advertisement
