Message Reception Mode; Message Waiting Notification-Device - Panasonic KX-TVA50 Feature Manual

2.2 System Features

2.2.30 Message Reception Mode

Description
Determines whether incoming calls are directed to the subscriber's regular mailbox or interview
mailbox.
This mode is effective for: Incomplete Call Handling Service (when the subscriber's line is busy, when
the subscriber cannot take the call, or when the subscriber has enabled Call Blocking), and when the
transfer destination of calls is set to a Logical Extension.
Programming Manual References
"All Calls Transfer to Mailbox" in 2.1.3 Mailbox Parameters
Feature Manual References
2.2.26 Interview Service
2.2.28 Logical Extension (All Calls Transfer to Mailbox)
Subscriber's Manual References
5.5 Message Reception Mode
2.2.31 Message Waiting Notification—Device
Description
Automatically calls a preprogrammed telephone number or beeper number when a subscriber has
new messages. New messages will be automatically played back when the subscriber answers the
call. When a beeper is called, the subscriber must call the VPS and log in to his or her mailbox to
listen to the messages.
Notifications can be scheduled. The System Administrator can program 2 different time frames (for
example, 9 AM to 12 PM and 8 PM to 10 PM) independently for each day of the week. Message
waiting notifications will be sent on the selected days during the programmed time frames.
Notifications can also be sent "continuously", meaning a notifications will sent whenever a new
message is received, 24 hours a day.
The VPS can prompt callers to enter their telephone numbers when they leave messages, and then
send caller phone numbers to the subscriber's beeper when sending notification.
Conditions
• Notification can be sent for either all messages or for urgent messages only, depending on the
"Notification Type" set by the System Administrator or subscriber. When set to "Only Urgent
Messages", notification is sent (according to the notification schedule, if programmed) only when
urgent messages have been left in the subscriber's mailbox.
• A maximum of 3 devices (telephones or beepers) can be programmed by the System
Administrator or subscriber for use with this feature. When the VPS calls a device and the call is
30 Feature Manual