Back Panel Connectors - Gigabyte GA-Z87X-UD5 TH User Manual

1-7

Back Panel Connectors

PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
USB 3.0/2.0 Port
The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.
Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.
Antenna Connector
Use this connector to connect an antenna.
DVI-I Port
(Note)
The DVI-I port conforms to the DVI-I specification and supports a maximum resolution of 1920x1200 (the
actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-I
connection to this port.
HDMI Port
(Note)
output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution
is 4096x2160, but the actual resolutions supported are dependent on the monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system. The screenshot below is from
Windows 8.)
(Note) Simultaneous output for DVI-I and the MDP2 Thunderbolt port is not supported. If a monitor is con-
nected to the MDP2 Thunderbolt port , the DVI-I port will become unavailable.
Hardware Installation
Tighten the antenna cables to the antenna connectors and then move
the antenna to a place where the signal is good.
The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio
In Windows 8, select All apps>Control Panel>Hardware and
Sound>Sound>Playback, set Intel(R) Display Audio to the default
playback device.
- 20 -