Gigabyte GA-Z87X-UD5 TH User Manual page 79

Create a RAID Array:
Step 1: On the main screen, press <Enter> on the RAID tab. Then the RAID Config menu appears (Figure 4).
Press <Enter> on the Create VD item.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection ] [ Adapter ]
ENTER/SPACE: Select, ESC: Back/Exit
Step 2: The next screen displays the two hard drives you installed. Press <Enter> or <Space> on the two hard
drives respectively to add them into the RAID array. Selected hard drives are marked with an asterisk (Figure
5). Then press <Enter> on NEXT.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection ] [ Adapter ]
Select free disks to create
Port Disk Name
* S0 SATA: WDC WD800JD-22LSA0
* S1 SATA: WDC WD800JD-22LSA0
NEXT
ENTER/SPACE: Select, ESC: Back/Exit
[ Devices ] [ RAID ]
RAID Config
Create VD
Delete VD
Wipe out disk
Spare Management
Figure 4
[ Devices ] [ RAID ]
RAID Config
Size Max Speed
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE
Figure 5
- 79 -
Status
Configuring SATA Hard Drive(s)