Gigabyte GA-Z87X-UD5 TH User Manual page 78

C. Configuring a RAID array in RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to the installation of
Windows operating system for a non-RAID configuration.
After the POST memory test begins and before the operating system boot begins, look for a message which
says "Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue" (Figure 2). Press <Ctrl> + <M> to enter
the RAID setup utility.
Marvell 88SE91xx Adapter - BIOS Version 1.0.1.0027
PCIe x1 5.0Gbps
Mode: RAID
[Virtual Disks]
No Virtual Disk!
[Physical Disks]
Adapter 0
Port Disk Name
S0 SATA: WDC WD800JD-22LSA0
S1 SATA: WDC WD800JD-22LSA0
Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue_
On the main screen of the RAID setup utility (Figure 3), use the left or right arrow key to move through tabs.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection ] [ Adapter ]
Adapter 0
Vendor ID Device ID:
BIOS Version:
PCI Slot:
IRQ Number:
Raid Mode:
ENTER/SPACE: Select, ESC: Back/Exit
Configuring SATA Hard Drive(s)
Size Max Speed
76.3GB SATA 3Gb/s
76.3GB SATA 3Gb/s
Figure 2
[ Devices ] [ RAID ]
1B4B:91A2
1.0.0.0027
00
0B
RAID0 RAID1
Figure 3
- 78 -