NordicTrack NTEL91211.0 User Manual page 17

HOW TO ACTIVATE THE CONSOLE
The included power adapter must be used to operate
the elliptical. See HOW TO PLUG IN THE POWER
ADAPTER on page 14. When the power adapter is
plugged in, the display will turn on and the console will
be ready for use.
HOW TO TURN OFF THE CONSOLE
If the pedals do not move for several seconds, a tone
will sound and the console will pause.
If the pedals do not move for several minutes and the
buttons are not pressed, the console will turn off and
the display will be reset.
When you are finished exercising, unplug the power
adapter. IMPORTANT: If you do not do this, the
electrical components on the elliptical may wear
prematurely.
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
See HOW TO ACTIVATE THE CONSOLE above.
2. Select the manual mode.
If you are not using the iFit Live module, the
manual mode will be selected automatically each
time you turn on the console.
You can also press the Manual button to select the
manual mode.
3. Change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons.
Note: After you press the buttons, it will take a
moment for the pedals to reach the selected resis-
tance level.
4. Follow your progress with the display.
The display can show the following workout
information:
Calories (Cals.)——This display mode will show the
approximate number of calories you have burned.
Calories per Hour (Cals./Hr)——This display mode
will show the approximate number of calories you
are burning per hour.
Distance (Dist.)——This display mode will show
the distance that you have pedaled in miles or
kilometers.
Pulse——This display mode will show your heart rate
when you use the handgrip heart rate monitor (see
step 5) or the included chest heart rate monitor
(see page 13).
Resistance (Resist.)——This display mode will
show the resistance level of the pedals for a few
seconds each time the resistance level changes.
RPM——This display mode will show your pedaling
speed in revolutions per minute (rpm).
17