Contact Garmin; Tools And Supplies Needed; Selecting A Location - Garmin GPSMAP 600 Installation Instructions Manual
Flush mount kit
Hide thumbs
Also See for GPSMAP 600:
- Owner's manual (59 pages) ,
- Quick start manual (13 pages) ,
- Declaration of conformity (6 pages)
Table of Contents
Advertisement
Available languages
Available languages
GPSMAP
Install this kit to flush mount a GPSMAP 600 series device into a flat panel.
Caution: Always wear safety goggles and a dust mask when drilling, cutting, or sanding.
notiCe: When drilling or cutting, always check the opposite side of the drilling or cutting surface.
See the Important Safety and Product Information guide in the GPSMAP 600 series product box for product warnings and other important information.
Compare the contents of this package with the packing list on the box. If any pieces are missing, contact your Garmin
Contact Garmin
Contact Garmin Product Support if you have any questions while installing the GPSMAP 600 series flush mount kit. In the USA, go to
www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to
www.garmin.com/support
phone at +44 (0) 870.8501241.
Tools and Supplies Needed
•
Drill and drill bits
•
Jigsaw
•
File and sandpaper
•
Number 2 Phillips screwdriver
•
Cable ties
Selecting a Location
When selecting a location for the GPSMAP 600 series flush mount kit, consider the following:
•
Use the flush-mount template provided to determine an appropriately sized location for the housing.
•
Ensure that all cables reach the unit mounting location.
•
Ensure that the surface on which you install the housing has at least 3
connected wires.
•
Ensure that you have a direct path to the floor behind the housing to install a drain hose.
•
Install the housing at least 17 in. (43 cm) away from a magnetic compass to prevent electromagnetic interference, which can cause
inaccurate compass readings.
•
The location should not be exposed to extreme temperature conditions. See the specifications section in the owner's manual of your
GPSMAP 600 series device to determine the safe temperature range for your device.
GPSMAP 600 Series Flush Mount Kit Installation Instructions
600 Series Flush Mount Kit Installation Instructions
®
Contact Support
and click
for in-country support information, or contact Garmin (Europe) Ltd. by
/
in. (89 mm) of open space behind it to fit the housing and the
1
2
dealer immediately.
®
Advertisement
Table of Contents
