External Device; Listening To An External Device - JVC RV-NB90B Instructions Manual

External device

Listening to an external device

1. Set the volume level of the System to
minimum.
2. Connect the external device.
Refer also to the instruction manual for the
external device.
Stereo mini
plug cord
(not
supplied)
3. Press AUDIO IN to select "AUDIO IN."
Remote control
4. Start playback of the external device.
5. Adjust the volume of the System and of
the external device.
Adjusting the audio input level
Adjust the audio input level when the volume
of the external device is too low compared to
other sources.
When AUDIO IN is selected as the source,
press SET.
Each time you press the button, the input level
changes as follows:
\ \
LEVEL1 LEVEL2
beginning)
A higher number indicates a greater increase
in input level.
The initial setting is "LEVEL 3."
18
External
device(not
supplied)
Headphone
jack, etc.
Main unit
(Press repeatedly)
\
LEVEL3 (back to the