Introduction - Fujitsu D3049 Technical Manual

1

Introduction

This technical manual describes the system board D3049, which can be
equipped with one processor.
For additional driver information (if available), refer to the Readme files located
on the server hard disk and on the supplied DVDs (see Installation DVD of
ServerView Suite - ServerView Software Products).
You will find further information about the BIOS setup in the "D3049 BIOS Setup
Utility for PRIMERGY TX140 S1 / TX120 S3" manual.
I
PRIMERGY manuals are available in PDF format on the
ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the
ServerView Suite supplied with every server.
PRIMERGY Abbreviations and Glossary can also be found on the
ServerView Suite DVD 2.
Model lines for TX140 S1
There are two model lines for the TX140 S1 server:
– TX140 S1
– TX140 S1p
I
For the European market:
You can identify the model line by the model name "TX140 S1p" printed
on the identification rating plate and on the ID card.
I
For the Japanese market:
"TX140 S1p" is not used as the model name in the Japanese market.
You can identify the model line by the product number; The product
number "PYT14Pxxx" means TX140 S1p.
For an overview of the different features please refer to
TX140 S1 / TX120 S3
Technical Manual
table 1 on page 17.
9