Overview - Fujitsu D3049 Technical Manual

Features
3.1

Overview

Processors
– one processor socket LGA1155
®
– one Intel Xeon
– CPUs with up to 95 W TDP (FMB 2011D) are supported
Main memory
– up to 4 slots for main memory
– up to 4 DDR3 UDIMM (unbuffered DIMM) memory modules
– only DIMMs with ECC are supported
– minimum memory configuration: one DIMM in DIMM1A
– maximum memory configuration: four DIMM in all slots
– up to 25.6 GB/s bandwidth in dual channel mode and 12.8 GB/s in single
channel mode
– ECC multiple bit error detection and single bit error correction
Chips on the system board
®
– Intel C202 chipset
– Gigabit Ethernet controller (Intel
– Gigabit Ethernet PHY controller (Intel
®
– Realtek RTL8211E Gigabit Ethernet PHY
– onboard iRMC S3 Server Management Controller with integrated graphics
controller
– 32 MB SPI Flash (code) and 2 MB SPI Flash (data) for iRMC S3
– 128 MB DDR3-800 SRAM for iRMC S3
– 8 MB SPI Flash BIOS / ME firmware
20
® ®
Pentium , or Core i3 processor
®
Technical Manual
82574L)
®
82579LM)
TX140 S1 / TX120 S3