Advertisement
A)
If your appliance comes fitted with a plug, it will incor-
porate a 13 Amp fuse. If it does not fit your socket, the
plug should be cut off from the mains lead, and an app-
ropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug
after removing the fuse: do not insert in a 13 Amp
socket elsewhere in the house as this could cause a
shock hazard.
With alternative plugs not incorporating a fuse, the cir-
cuit must be protected by a 15 Amp fuse.
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Green and yellow:
Earth
Blue:
Neutral
Brown:
Live
2
573243/
07.94
ELECTRICAL CONNECTION (UK ONLY)
B)
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The green and yellow wire must be connected to the termi-
nal in the plug marked with the letter E or the earth symbol
E
The blue wire must be connected to the terminal marked
L
with the letter N or coloured black.
N
The brown wire must be connected to the terminal marked
with the letter L or coloured red.
If the plug is a moulded-on type, the fuse cover must be
re-fitted when changing the fuse using a 13 Amp Asta
approved fuse to BS 1362. In the event of losing the
fuse cover, the plug must NOT be used until a replace-
ment fuse cover can be obtained from your nearest
electrical dealer. The colour of the correct replacement
fuse cover is that as marked on the base of the plug.
If your appliance is not fitted with a plug, please fol-
low the instructions provided below:
or coloured green or green and yellow.
Advertisement
