Dell PowerConnect W-AirWave 7.6 Configuration Manual page 53

Column
AAA
Captive Portal Profile
802.1X Auth
Stateful 802.1X Auth
VPN Auth
Folder
The Security > User Roles > Add New User Role page contains the following fields, as described in
Table 9:
Security > User Roles > Add New User Role Fields and Descriptions
Field
General Settings
Folder
Name
Other Settings
Captive Portal Profile
Downstream Bandwidth
Contract
Downstream Contract
Applies Per User
Upstream Bandwidth
Contract
Upstream Contract
Applies Per User
Maximum Number of
Datapath Sessions
Dell PowerConnect W-AirWave 7.6 | Configuration Guide
Description
Displays the AAA profile or profiles that are referenced by the user role.
Displays the Captive Portal Auth profiles, if any, that are referenced by the user role.
Displays the 802.1X Auth profiles that are referenced by the user role.
Displays the Stateful 802.1X Auth profiles that are referenced by the user role.
Displays the VPN Auth profiles that are referenced by the user role.
Displays the folder that is associated with this User Role. A Top viewable folder for the role is
able to view all devices and groups contained by the top folder. The top folder and its
subfolders must contain all of the devices in any of the groups it can view.
Clicking any folder name takes you to the APs/Devices > List page for folder inventory and
configuration.
Default Description
Set the folder with which the User Role is associated. The drop-down menu
Top
displays all folders available for association with the profile.
Blank Enter the name of the user role.
(Optional) Select the Captive Portal Auth profile, if any, that is to be referenced
None by the user role. Select the add icon to create a new profile, or click the pencil
icon to edit an existing profile.
(Optional) You can assign a bandwidth contract to provide an upper limit to
upstream or downstream bandwidth utilized by clients in this role. You can
select the Per User option to apply the bandwidth contracts on a per-user
None
basis instead of to all clients in the role.
"Security > User Roles > BW Contracts" on page
Refer to
If you selected a DS BW contract in the prior field, this gray field becomes
No
active. Select Yes or No.
(Optional) You can assign a bandwidth contract to provide an upper limit to
upstream or downstream bandwidth utilized by clients in this role. You can
select the Per User option to apply the bandwidth contracts on a per-user
None
basis instead of to all clients in the role.
Refer to "Security > User Roles > BW Contracts" on page
If you selected an US BW contract in the prior field, this gray field becomes
No
active. Select Yes or No.
Use this field to configure a maximum number of sessions per user in this role.
None
You can configure any value between 0-65535.
Table 9:
48.
48.
Configuration Reference | 47