Dell PowerConnect W-AirWave 7.6 Configuration Manual page 41

Table 3:
AP Overrides Fields and Descriptions
Field
Name
Used By (Group)
Folder
Select Add on the AP Overrides page to create a new AP Override, or click the pencil icon next to an existing
override to edit that override.
Table 4:
AP Overrides Add or Edit Page Fields
Field
Name
Folder
WLANs
WLANs
Excluded WLANs
Excluded WLANs
Referenced Profiles
802.11a Radio Profile
802.11g Radio Profile
Dell PowerConnect W-AirWave 7.6 | Configuration Guide
Description
Displays the name of the AP Overrides profile. This name matches the name of the specific AP
device that it defines.
Displays the name of and link to the Dell PowerConnect W AP Group in which this AP Override
applies. Additional details about the Dell PowerConnect W AP Group appear on the Groups > Dell
PowerConnect W Config page when you click the name of the group.
Displays the folder associated with the AP Overrides profile. The folder establishes the visibility of
this profile to users.
Table 4 describes the fields on the AP Overrides > Add/Edit Details page.
Default Description
Blank Name of the AP Override. Use the name of the AP device to which it applies.
Displays the folder with which the WLAN is associated. The drop-down menu
Top
displays all folders available for association with the WLAN.
This section lists the WLANs currently defined in Dell PowerConnect W
Configuration by default. You can display selected WLANs or all WLANs.
Select one or more WLANs for which AP Override is to apply.
This section displays WLANs currently defined in Dell PowerConnect W
Configuration by default. This section can display selected WLANs or all WLANs.
Use this section to specify which WLANs are not to support AP Override.
Defines AP radio settings for the 5 GHz frequency band, including the Adaptive
Radio Management (ARM) profile and the high-throughput (802.11n) radio profile.
5_am
Select the pencil icon next to this field to edit or create additional profile settings
in the RF > 802.11a/g Radio page.
Defines AP radio settings for the 2.4 GHz frequency band, including the Adaptive
Radio Management (ARM) profile and the high-throughput (802.11n) radio profile.
Each 802.11a and 802.11b radio profile includes a reference to an Adaptive Radio
Management (ARM) profile.
If you would like the ARM feature to select dynamically the best channel and
transmission power for the radio, verify that the 802.11a/802.11g radio profile
2.4_am
references an active and enabled ARM profile. If you want to manually select a
channel for each AP group, create separate 802.11a and 802.11g profiles for each
AP group and assign a different transmission channel for each profile.
The drop-down menu displays these options:
default
l
Configuration Reference | 35