Dell PowerConnect W-AirWave 7.6 Configuration Manual page 21

Figure 16:
Dell PowerConnect W Configuration > Dell PowerConnect W AP Groups > Add/Edit Details
Page (Partial View)
For additional information about configuring Dell PowerConnect W AP Groups, see
AP Groups Procedures and Guidelines" on page
8. Add or edit WLANs in Dell PowerConnect W Configuration as required.
a. Navigate to the Dell PowerConnect W Configuration > WLANs page. This page can display all WLANs
currently configured, or it can display only selected WLANs.
b. Click Add to create a new WLAN, or click the pencil icon to edit an existing WLAN.
You can add or edit WLANs in one of two ways, as follows:
Basic—This display is essentially the same as the ArubaOS Wizard View on the Dell PowerConnect W-
n
Series controller. This page does not require in-depth knowledge of the profiles that define the Dell
PowerConnect W AP Group.
Advanced—This display allows you to select individual profiles that define the WLAN and associated Dell
n
PowerConnect W AP Group. This page requires in-depth knowledge of all profiles and their respective
settings.
The following sections of this configuration guide provides additional information and illustrations for
configuring WLANs:
"General WLAN Guidelines" on page 20
n
"WLANs" on page 38
n
9. Add or edit Dell PowerConnect W Configuration Profiles as required.
a. Navigate to the Dell PowerConnect W Configuration > Profiles section of the navigation pane.
b. Select the type of profile in the navigation pane to configure: AAA, AP, Controller, IDS, Mesh, QoS, RF, or
SSID.
c. Click Add from any of these specific profile pages to create a new profile, or click the pencil icon to edit an
existing profile.
Dell PowerConnect W-AirWave 7.6 | Configuration Guide
19.
for details on all WLAN settings
"Dell PowerConnect W
Dell PowerConnect W Configuration in AirWave | 15