Table of Contents
Advertisement
If the phone is busy when you place an intercom call, you can do any of the fol-
lowing:
·
To stay on the line and wait for the phone to become available: Do not hang up.
After a system timer expires, you hear music until the phone is available. (You
cannot do this if the called phone is in Do-Not-Disturb mode.)
·
To request a callback (queue on to the phone): Press
phone is available, your phone rings. (To cancel the queue request before the call-
back, press
·
To use the Off-Hook Voice Announce feature (if the called phone is programmed
for it): Do not hang up. After the busy signals stop, you are automatically con-
nected and may speak. (If you hear music or if the phone is in Do-Not-Disturb
mode, your off-hook voice announce call will not go through.) This allows you to
talk to the phone user on his or her handsfree speakerphone, even though the user
already has a call in progress on the handset. This feature is not available if your
phone has the Ring Intercom Always feature enabled.
Receiving Intercom Calls
To receive an intercom call that comes in through your speakerphone:
EITHER, Respond handsfree.
OR, Lift the handset for privacy.
To receive a ringing (non-handsfree) intercom call:
EITHER, Lift the handset for privacy.
OR, Press
SPKR
NOTE:
You must lift the handset if the caller has the Ring Intercom Always feature
enabled.
To disable your phone's handsfree answering feature:
With the handset in the cradle, dial
this feature again.)
To redirect a ringing call to another extension or to an outside number:
Press
1.
Enter the extension or outside number to which you want to redirect the call. See
2.
page 19
12
.)
6
or
to respond handsfree.
IC
3
¥
and dial
3
3
1
for more information.
6
. (Repeat this step if you want to enable
1
9
.
Axxess Standard Display and Basic Digital Phone User Guide
and hang up. When the
Advertisement
Chapters
Table of Contents
