Upgrading Firmware - Cisco Small Business RV220W Administration Manual

Administering Your Cisco RV220W

Upgrading Firmware

STEP 1
STEP 2
STEP 3
Upgrading Firmware
!
CAUTION
STEP 1
STEP 2
STEP 3
Cisco RV220W Administration Guide
To import a .csv file:
Choose Administration > CSV File Import.
Click Browse.
On your computer, locate and select the .csv file. Click Import.
During a firmware upgrade, do not try to go online, turn off the device, shut down
the PC, or interrupt the process in any way until the operation is complete. This
process takes about a minute, including the reboot process. Interrupting the
upgrade process at specific points when the flash is being written to may corrupt
the flash memory and render the router unusable.
To upgrade firmware:
Choose Administration > Firmware Upgrade.
Click Browse and locate and select the downloaded firmware.
Choose one of the following:
• Upload—Uploads the new firmware and saves your current configuration
settings.
• Upload & factory reset—Uploads the new firmware, but overwrites your
current configuration settings with the factory defaults. Use only if you want
to erase all of your router settings.
After the new firmware image is validated, the new image is written to flash, and
the router is automatically rebooted with the new firmware. Choose Status >
System Summary to make sure the router installed the new firmware version.
7
157