Chapter 7：Dhcp Server; Dhcp Server Setting - Tenda W300D User Manual

Chapter 7：DHCP Server

7.1 DHCP Server Setting

DHCP (Dynamic Host Control Protocol) is to assign an
IP address to the computers on the LAN/private
network. When you enable the DHCP Server, the DHCP
Server will allocate automatically an unused IP
address from the IP address pool to the requesting
computer in premise of activating "Obtain an IP
Address Automatically". So specifying the starting and
ending address of the IP Address pool is needed.
DHCP Server:
Activate the checkbox to enable server.
IP Address Start/End:
Enter the range of IP address for DHCP server
assignment.
Lease Time:
The time length of the IP address lease.
For example: set the lease time as one hour.
Then the DHCP server will recycle and assign
the IP address again.
W300D Wireless-N ADSL2+ Router
52