Remote Web Management - Tenda W300D User Manual

10.5 Remote Web Management

This section is to allow the network administrator to
manage the Router remotely. If you want to access the
Router from outside the local network, please select
the "Enable".
Enable:
Check to enable remote web management.
Port:
The management port open to outside access.
The default value is 80.
WAN IP Address:
Specify the range of the WAN IP address for
remote management.
Note：
If you want to login the device's
Web-based interface via port 8080, you
need use the format of WAN IP address:
W300D Wireless-N ADSL2+ Router
74