Wds Setting - Tenda W300D User Manual

6.4 WDS Setting

WDS (Wireless Distribution System) can be used to
expand your current wireless network coverage. The
Router supports three modes: Lazy, Bridge and
Repeater.
Lazy：
In this mode, the connected wireless device
should be in Bridge or Repeater mode, and
select the Router's BSSID to implement
wireless connection.
Bridge：
In this mode, you can connect two or more
wired networks via wireless signals. In this
mode, you need add the Wireless MAC
address of the connecting device into the
Router's AP MAC address table or select one
from the scanning table.
W300D Wireless-N ADSL2+ Router
46