Setting Up An Internet Connection With Pppoe - Tenda F6 User Manual

The following table may help you understand your internet connection type. If you are still
uncertain about your internet connection type, consult your ISP.
Parameter
PPPoE
Dynamic IP
Static IP Address
5.1.1

Setting up an internet connection with PPPoE

Step 1 Choose Internet Settings to access the page.
Step 2 Set Operating Mode to Router.
Step 3 Set Connection Type to PPPoE.
Step 4 Enter User Name and Password provided by your ISP.
Step 5 Click OK at the bottom of the page.
---End
After the settings take effect, check the connection status, if "Connected. You can access the
internet." is displayed, the router is connected to the internet successfully.
Description
If you directly connect an Ethernet cable with internet connectivity to your
computer, you can access the internet only after setting up a dial-up connection on
the computer using a user name and password provided by your ISP.
If you directly connect an Ethernet cable with internet connectivity to your
computer, you can access the internet without configuring your computer.
If you can access the internet only after setting static IP address and other related
information on your computer, your connection type is static IP address.
12