Sony DSC-W530 Service Manual page 14

qs Match three ditches of the Fixed Stationary Tube Block to three convex parts of the Straight Tube Lubricated Assy and install it.
Fixed Stationary Tube Block
qd Install the Naruto Gear on the Fixed Stationary Tube Block.
qf Rotate the Naruto Gear and the lens is drawn out.
Naruto Gear
Lubricated Assy
Fixed Stationary
Tube Block
qg Pass the Flexible Board through the hole of the Fixed Stationary Tube.
qh Rotate the Naruto Gear and the lens is retractile.
Flexible Board
Fixed Stationary Tube
DSC-W530_L2
Eyepiece Side View
Straight Tube
Convex Parts
Lubricated Assy
Fixed Stationary
Tube Block
Ditches
Naruto Gear
qj Install the Warm B Lubricated Assy.
qk Connect the Iris Flexible Board from connector of 2 Frame Assy.
Warm B
Lubricated Assy
ql Install the 3 Group Spring.
w; Install the 3 Group Frame.
3 Group Frame
wa Install the Rear Mirror Plate with the four screws in the order of numbers.
*Tightening torque = 0.049 ± 0.01N • m (0.5 ± 0.1kgf • cm)
Screw
Screw
Rear Mirror Plate
Screw
ws Perform the Flange Back Adjustment after the assembling.
1-11
Iris Flexible Board
3 Group Frame
3 Group
Spring
3 Group Spring
Screw
4
1
2
3
Flexible Board
of 2 Frame Assy