Sony DSC-W530 Service Manual page 13

Installation
1 Install the 1 Group Lens Assy to the 1 Group Frame.
2 Rotate the 1 Group Lens Assy and align triangular sign with round sign.
3 Apply the bond at the three points.
Note: Use the Super X or the equivalent
1 Group Lens Assy
1 Group Frame
4 Affix two Barrier Tapes to Barrier Assy.
Note: The tape must not be wrinkled.
5 With four claws fitted in position, install the Barrier Assy.
Barrier Assy
Barrier Tape
Barrier Tape
6 Peel off release papers of Barrier Tapes.
7 Install Ornamental Ring A and press it lightly.
Barrier Tapes
DSC-W530_L2
Objective Side View
1 Group Lens Assy
Bond
Triangular sign
Round sign
Barrier
Barrier Assy Lever
Claws
Hole
Claws
Ornamental Ring A
8 Install the Straight Tube Lubricated to the Cam Tube Block Assy.
9 Rotate (about 120 degree) Straight Tube Lubricated Assy and align two points of ditches of the Straight Tube Lubricated Assy with
ditches of the Cam Tube BlockAssy.
Straight Tube
Lubricated Assy
Cam Tube Block Assy
q; Match three ledges of the 1 Group Assy to three ditches of the Cam Tube Block Assy and install it.
1 Group Assy
qa Match three ledges of the 2 Group Assy to three ditches of the Straight Tube Lubricated Assy and install it.
2 Group Assy
1-10
Eyepiece Side View
Ditches
Straight Tube
Lubricated Assy
Ditches
120
Cam Tube
Block Assy
Ditches
Eyepiece Side View
Ledges
1 Group Assy
Cam Tube
Block Assy
Ditches
Eyepiece Side View
Ledges
2 Group Assy
Ditches
Straight Tube
Lubricated Assy