Dual Pitch - Yamaha 006IPTO-F0 Owner's Manual

HQ. PITCH
One input, two output high-quality pitch shifter.
Parameter Range
–12 to +12 semi-
PITCH Pitch shift
tones
FINE –50 to +50 cents Pitch shift fine
DELAY 0.0–1000.0 ms Delay time
Feedback gain (plus values for
normal-phase feedback, minus
FB. GAIN –99 to +99%
values for reverse-phase feed-
back)
MODE 1–10 Pitch shift precision
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE
TEMPO to determine DELAY
1.
(Maximum value depends on the tempo setting)

DUAL PITCH

Two input, two output pitch shifter.
Parameter Range
–24 to +24 semi-
PITCH 1 Channel #1 pitch shift
tones
FINE 1 –50 to +50 cents Channel #1 pitch shift fine
Channel #1 level (plus values for
LEVEL 1 –100 to +100% normal phase, minus values for
reverse phase)
PAN 1 L63 to R63 Channel #1 pan
DELAY 1 0.0–1000.0 ms Channel #1 delay time
Channel #1 feedback gain (plus
values for normal-phase feed-
FB. G 1 –99 to +99%
back, minus values for
reverse-phase feedback)
–24 to +24 semi-
PITCH 2 Channel #2 pitch shift
tones
FINE 2 –50 to +50 cents Channel #2 pitch shift fine
Channel #2 level (plus values for
LEVEL 2 –100 to +100% normal phase, minus values for
reverse phase)
PAN 2 L63 to R63 Channel #2 pan
DELAY 2 0.0–1000.0 ms Channel #2 delay time
Channel #2 feedback gain (plus
values for normal-phase feed-
FB. G 2 –99 to +99%
back, minus values for
reverse-phase feedback)
MODE 1–10 Pitch shift precision
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE 1 TEMPO to determine Channel
#1 delay
Used in conjunction with
NOTE 2 TEMPO to determine Channel
1
#2 delay
1.
(Maximum value depends on the tempo setting)
ROTARY
One input, two output rotary speaker simulator.
Description Parameter
ROTATE
SPEED
SLOW
FAST
DRIVE
ACCEL
LOW
HIGH
RING MOD.
Two input, two output ring modulator.
Parameter
SOURCE
OSC FREQ
Description FM FREQ.
FM DEPTH
SYNC
NOTE FM
1.
MOD. FILTER
Two input, two output modulation filter.
Parameter
FREQ.
DEPTH
PHASE
TYPE
OFFSET
RESO.
LEVEL
SYNC
NOTE
1.
DISTORTION
One input, two output distortion effect.
Parameter
DST TYPE
DRIVE
MASTER
TONE
N. GATE
Effects Parameters
Range Description
STOP, START Rotation stop, start
Rotation speed (see SLOW and
SLOW, FAST
FAST parameters)
0.05–10.00 Hz SLOW rotation speed
0.05–10.00 Hz FAST rotation speed
0–100 Overdrive level
0–10 Acceleration at speed changes
0–100 Low-frequency filter
0–100 High-frequency filter
Range Description
Modulation source: oscillator or
OSC, SELF
input signal
0.0–5000.0 Hz Oscillator frequency
Oscillator frequency modulation
0.05–40.00 Hz
speed
Oscillator frequency modulation
0–100%
depth
OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
TEMPO to determine FM FREQ
Range Description
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
Left-channel modulation and
0.00–354.38
right-channel modulation phase
degrees
difference
Filter type: low pass, high pass,
LPF, HPF, BPF
band pass
0–100 Filter frequency offset
0–20 Filter resonance
0–100 Output level
OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
TEMPO to determine FREQ
Range Description
DST1, DST2,
Distortion type (DST = distor-
OVD1, OVD2,
tion, OVD = overdrive)
CRUNCH
0–100 Distortion drive
0–100 Master volume
–10 to +10 Tone
0–20 Noise reduction
DM1000 Version 2—Owner's Manual
313