Table of Contents
Advertisement
SSL
You can select a secure connection system or install the public certificate for this purpose.
1. From the Setup menu, select the
<network (
)> tab.
2. Click <SSL>.
3. Select a secure connection system.
To access the camera using HTTPS mode, you
`
have to type the IP address for the camera in
the form of "https://<Camera_IP>".
If you failed to configure the Web viewer
settings in HTTPS mode with Internet Explorer,
edit the Internet options as follows: <Menu
Tools Internet Options Advanced Security Uncheck TLS 1.0, and check TLS 1.1, TLS 1.2>
4. Search for the public certificate that you want to install on the camera.
To install the certificate on the camera, you need to provide a certificate name (it
can be arbitrarily assigned by the user), certificate file issued from the certification
authority and a key file.
The <HTTPS (Secure connection mode using the public certificate)> item will be active only if
`
there exists a public certificate installed.
5. When done, click [apply (
installing the certificate
1. Enter the certificate name.
2. Select the certificate file to be installed and certificate key, and click [install (
button.
Deleting the certificate
1. Click [Delete (
2. To delete a public certificate, you should access the network video decoder in
the mode of <Http (Do not use secure connection)> or <HttpS (Secure
connection mode using a unique certificate)>.
)].
)] button.
)]
English _97
Advertisement
Table of Contents
