Table of Contents
Advertisement
setup screen
audio detection
You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the
<event (
2. Click <event setup>.
3. Select <audio detection> from <event
action setup> .
4. Set whether or not to <enable> .
5. Set the audio detection's sound level.
The lower the level, the smaller the
sound change is detected.
6. Specify the activation time and activation
condition.
For more information about < Activation
`
time > and < Action > , refer to "Alarm input".
(page 105)
7. When done, click [apply (
If detected audio level is too low, set the audio input gain to a higher level in <Audio setup>.
`
M
Please use the audio detection function when connecting to an external audio input device.
`
network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
<event (
2. Click <event setup>.
3. Select <network disconnection> from
<event action setup> .
4. Set whether or not to <enable> .
5. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 105 )
6. When done, click [apply (
116_ setup screen
)> tab.
)> tab.
)].
)].
Advertisement
Table of Contents
