Table of Contents
Advertisement
setup screen
motion detection / video analytics
Events of motion detection and video analysis can be set to trigger event signal output.
1. From the Setup menu, select the
<event (
2. Click <event setup >.
3. Select <motion detection / video
analytics> from <event action
setup>.
4. Set whether or not to <enable>.
5. According to your purpose, select from
motion detection and intelligent video
analysis.
6. Set <Sensitivity>, <Size> and <area>.
When selected Intelligent Video
Analysis, set <analytics> too.
7. Set whether to use <Detection result
overlay>.
When a motion is detected, its size and
position is marked with a rectangle on
the screen.
• Green : All targets detected as
moving.
• Red : It is an object judged to have
passed, entered or escaped (with
the color maintained for 1 or 2
seconds) or to have appeared or disappeared (with the color maintained for 3 to 5
seconds).
8. Specify the activation time and activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 105)
`
9. When done, click [apply (
108_ setup screen
)> tab.
)].
Advertisement
Table of Contents
