Remote Control Preparation - Dual XDVD110BT Installation & Owner's Manual

Remove battery insulation tape
To insert or replace the battery,
remove the battery holder.
Remove the battery from the
battery holder.
Install the new battery.
Make sure to keep the (+) side up.
Insert the battery holder .
XDVD110BT

Remote Control Preparation

Notes:
• The remote control uses one 3 volt Lithium
CR2025 battery. Remove the battery if the
remote will not be used for a month or
longer.
• Remove and dispose of battery properly.
• Do not store battery with metallic objects
or materials.
OPERATION
8