Initial Settings - JVC LT-32SH6 Instructions Manual

Initial settings

When the TV is first turned on, it enters the initial setting
mode. Follow the instructions on the on-screen display to
make the initial settings.
TV/DTV
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the button on the remote control
After a short interval the power lamp changes from red to
green.
button
/I
VCR/TV/
DVD Switch
MENU
3 AUTO PROGRAM menu appears
INSTALL
►AUTO PROGRAM
▼▲:SELECT
4 Press the OK button to enter the
AUTO PROGRAM.
AUTO PROGRAM
START
OK: START
5 Press the OK button to start AUTO PROGRAM.
AUTO PROGRAM
NOW PROGRAMMING
◄ ▄▄▄▄
MENU:EXIT
The AUTO PROGRAM menu appears and received TV
channels are automatically stored.
• To cancel the AUTO PROGRAM function:
Press the MENU button.
After the TV channels have been registered in the
program numbers, the PR LIST menu appears
PR LIST
01 ----- 11 -----
02 ----- 12 -----
03 ----- 13 -----
04 ----- 14 -----
05 ----- 15 -----
06 ----- 16 -----
07 ----- 17 -----
08 ----- 18 -----
09 ----- 19 -----
10 ----- 20 -----
▓ NAME
▓ INSERT
• If you want, you can now edit the program numbers
using the AUTO PROGRAM function.
For details, see "To edit the PR LIST menu" on page 20.
►
◄►:MOVE
►
►
21 -----
22 -----
23 -----
24 -----
25 -----
26 -----
27 -----
28 -----
29 -----
30 -----
▓
DELETE
▓
7