Setting Up Your Tv; Installation; Using The Stand - JVC LT-32SH6 Instructions Manual

Setting up your TV

Installation

Cautions for installation
• Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
• The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to
allow satisfactory cooling. See "Distance recommendations" on page 3.

Using the stand

This TV comes with a Table Top Stand already
attached.
This stand can be used to adjust the directions of the TV
screen. (depending on each model)
Tilt the TV up and down: (only LT-32SH6)
While holding the bottom of the stand with one hand, use
your other hand to hold the middle of the top of the TV
and slowly tilt the TV up and down.
• As a safety measure, the stand is constructed so that it
requires a certain amount of force to tilt the TV.
Rotate the TV to the left and right:
While holding the bottom of the stand with one hand, use
your other hand to hold the edge of the panel and slowly
adjust the direction of the TV screen.
4
Tidy the cables:
A cable holder which is used to keep the connection cables
tidy is attached to the back of the stand.
LT-32SH6
LT-37SH6