Pc Menu; Pc Picture Position; Picture - JVC LT-32SH6 Instructions Manual

PC MENU (In PC mode only)
This TV also has a number of functions on PC mode; you
can operate using pc menus.

PC MENU

►PC PICTURE POSTITION

PICTURE

SOUND
▼▲:SELECT
1024 X 768
H:48 kHz

PC PICTURE POSITION

You can adjust the picture settings as following functions.
PC PICTURE POSITION
►AUTO SETUP
H POSITION
V POSITION
CLOCK
PHASE
RESET
▼▲:SELECT
AUTO SETUP:
You can adjust picture settings automatically for optimized
picture position, clock and phase.
H POSITION:
You can adjust picture horizontal position.
： left
： right
V POSITION:
You can adjust picture vertical position.
： down
： up
CLOCK:
You can adjust CLOCK to fine tune picture.
PHASE:
You can adjust PHASE to fine tune picture.
RESET:
You can select RESET mode for default setting.
30
►
►
►
OK:MOVE
V:60 Hz
◄ ▄▄▄▄▄
►
◄ ▄▄▄▄▄
►
◄ ▄▄▄▄▄
►
◄ ▄▄▄▄▄
►
◄►:MOVE
PICTURE
You can change the picture settings of each PICTURE MODE
mode as you like.
PC PICTURE
►CONTRAST
BRIGHT-1
WHITE BALANCE
R
G
B
RESET
▼▲:SELECT
CONTRAST:
You can adjust the picture contrast.
： low
： high
BRIGHT-1:
You can adjust the picture brightness.
： darker
:： lighter
Connecting the PC
Connect the PC with the D-SUB cable to the D-SUB in at
the TV, and connect the sound device of PC with a stereo
mini-jack to PC AUDIO IN.
You can adjust the picture by AUTO SETUP function when
the PC signal is output correctly, the AUTO SETUP
function can optimize the picture position, clock and phase.
You can have a fine vision after AUTO SETUP function
executed.
◄ ▄▄▄▄▄
►
◄ ▄▄▄▄▄
►
HIGH
◄ ▄▄▄▄▄
►
◄ ▄▄▄▄▄ ►
►
◄ ▄▄▄▄▄
◄►:MOVE