Operating Jvc's Tvs Using The Remote Control - JVC CA-NXG9 Instructions Manual

• When the track starts playback, that track number
will be erased from the Karaoke Reserve screen (the
programmed contents will remain until you erase it).
• For some VCD, the Karaoke Scoring result may not
appear at the end of the track if PBC is activated. In
this case, press 7 to view your scoring result.
On-Screen Operations
On-screen Bar Operations:
• A-B Repeat is available only within the same title/
program/track.
Timer Operations
(see pages 54 to 56)
Setting the Daily Timer:
• If you do not specify the preset station or track
number correctly while setting a timer, the currently
selected station or the first track will be played when
the timer is activated.
• When you unplug the power cord or if a power
failure occurs, the timer will be canceled. You need
to set the clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will
not work correctly.
• If you set the Sleep Timer after Daily Timer starts
playing the selected source, Daily Timer is canceled.
Setup Menu Operations
General:
• If the upper and lower parts of the menu are cut off,
adjust the picture size control of the TV.
LANGUAGE menu:
• When the language you have selected for "MENU
LANGUAGE," "AUDIO LANGUAGE," or
"SUBTITLE" is not recorded, the original language is
used as the initial language.
PICTURE menu—MONITOR TYPE:
• Even if "4:3 PS" is selected, the screen size may
become 4:3 letter box while playing a disc/file. This
depends on how the discs are recorded.
• When you select "16:9" for a picture whose aspect
ratio is 4:3, the picture changes slightly due to the
process of converting the picture width.
OTHERS menu—ON SCREEN GUIDE:
• The setup menu and on-screen bar will be displayed
(and recorded) even if this function is set to "OFF."
Subtitles and the information for zoom-in always
appear on the display regardless of this setting.
(see pages 49 to 53)
(see pages 57 and 58)
Operating JVC's TVs Using the Remote
Control
Remote control
TV/VIDEO
SHIFT
You can use the remote control to operate JVC's TVs.
TV Turn on/off TV.
Change the input mode.
TV/VIDEO
TV CHANNEL Change the channel.
+, –
TV VOL +, – Adjust the TV volume.
(NX-G5)
While holding SHIFT, press...
TV VOL +, – Adjust the TV volume.
(CA-NXG9)
TV
(CA-NXG9)
62