Listening To Music Using Bluetooth Headphones - JVC CA-NXG9 Instructions Manual

To turn off the sound from the Bluetooth audio
player temporarily
Press Bluetooth SETTING repeatedly to select
"CANCEL?", then press ENTER/SET.
To resume the sound, press Bluetooth SETTING
repeatedly to select "RECEIVE?", then press ENTER/
SET.
To change the device to connect
If you have registered several Bluetooth audio players,
select which device is to be connected to the System.
1
RECEIVE ?
PAIRING?
SYS INFO ?
SOUND QLTY?
DEVICE A
The name of the current Bluetooth audio player
appears.
2
Select the device to connect.
If a Bluetooth connection cannot be established
Try the following if "CAN'T CNNCT" appears on the
display:
• Set the Bluetooth audio player ready to make
connections (refer to the device's manual for details),
press Bluetooth SETTING repeatedly to select
"RECEIVE?", then press ENTER/SET.
Listening to Music Using Bluetooth
Headphones
• See "What is pairing?" on page 38.
1
2
CANCEL ?
SELECT DV ?
DELETE DV ?
3
CHNG NAME ?
4
Pairing
Turn on the Bluetooth headphones and set
it ready to be found by the System.
• See the headphones' manual for details.
Select a source other than "Bluetooth."
Activate Bluetooth transmitter.
2 sec
2 sec
or
Bt ON
The Bluetooth indicator of the System starts
flashing.
Start searching for the headphones.
SEND ?
SEARCH DV ?
SYS INFO ?
SOUND QLTY?
SEARCHING
The System starts searching for Bluetooth
headphones.
The name of the first found device is displayed.
Continued on the next page.
Bluetooth
CANCEL ?
SELECT DV ?
DELETE DV ?
CHNG NAME ?
40