Advertisement
ILLUSTRATION
A
F
G
B
D E
C
A. Grill Hub
B. Screw
C. Washer
D. Grill Ring
E. Front Grill
F. Blade Nut
G. Blade
H. Rear Grill Mounting-Nut
I. Rear Grill
J. Metal Plate
K. Motor Shaft
L. Motor Housing Prong
M. Handle
N. Oscillation Knob
O. Motor Housing
P. Upper Pole
Q. Speed Control Lever
R. Upper Pole Nut
S. Adjustable Height Nut
T. Extension Pole
U. Lower Pole
V. Stand Lock
W. Foot Extension (4)
OPERATING INSTRUCTIONS
Step 1: Set the fan base on a dry, level surface.
Step 2: Please make sure the On/Speed lever is in the "Off" position.
Plug the cord into any standard 120-volt A/C outlet.
Step 3: The SPEED is adjusted by moving the lever up or down to the
desired setting.
Step 4: The OSCILLATION control knob is located on the top of the fan
motor housing. To start oscillation, push control knob down. To
stop oscillation, pull control knob up
M
K
H
L
I
Q
J
W
ADJUSTMENT INSTRUCTIONS
Tilt Adjustment
N
To change the tilting angle of the fan head, move the fan head to the
O
desired angle.
Height Adjustment
P
Loosen the adjustable height nut and slide the fan up or down to the
desired position and then tighten the nut.
WARNING: MAKE SURE TO SUPPORT THE FAN HEAD ASSEMBLY WHEN
R
LOOSENING THE ADJUSTABLE HEIGHT NUT, AS THE WEIGHT OF THE FAN
S
HEAD MAY CAUSE THE EXTENSION POLE TO COLLAPSE.
T
CLEANING/MAINTENANCE
U
Follow these instructions to correctly and safely care for your Holmes
stand fan. Please remember:
• Always unplug the fan before cleaning or disassembling.
V
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner, benzine
(See instructions for fan head assembly)
Step 1: To access the fan blade, remove the front grill and the fan
blade nut.
Step 2: Clean the fan blade, both front and rear grills with a soft cloth
moistened with a mild soap solution.
Step 3: Replace blade, tighten the fan blade nut, and securely fasten
the front grill.
Fan Head, Base, and Pole Cleaning
Using a soft, moist cloth, with or without a mild soap solution, carefully
clean the fan base, pole, and head. Please use caution around the
motor housing area. Do not allow the motor or other electrical
components to be exposed to water.
FAN STORAGE
Your fan can be stored in the off-season either partially disassembled or
assembled. It is important to keep it in a safe, dry location.
• If stored disassembled, we recommend using the original (or appro-
priately sized) box.
• If stored assembled or partially assembled, remember to protect the
fan head from dust.
Advertisement
