Advertisement
OPERATING INSTRUCTIONS
IMPORTANT:
Step 1: Set the fan base on a dry, level surface.
Step 2: Plug the cord into any standard 120-volt A/C outlet.
To turn the fan on press one of the three speed buttons
marked (1) low, (2) medium, or (3) high. To turn the fan off
press the button marked (0) off.
Step 3: The SPEED is adjusted by pressing one of the three buttons
for your desired level of cooling comfort.
Step 4: The OSCILLATION button is located on the top of the fan
control panel. To start oscillation, push button down. To stop
oscillation, push the button again.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for your
Holmes Tower Fan. Please remember:
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline,
thinner, benzine.
• We also recommend the periodic cleaning of this fan by lightly
running a vacuum cleaner nozzle over the fan grill to remove
any dust or dirt that may have accumulated inside or on the unit.
Fan Head and Base Cleaning
Using a soft, moist cloth, with or without a mild soap solution,
carefully clean the fan housing. Please use caution around
the grills. Do not allow the motor or other electrical components to
be exposed to water.
FAN STORAGE
Your fan can be stored in the off-season either partially disassembled
or assembled. It is important to keep it in a safe, dry location.
• If stored disassembled, we recommend using the original
(or appropriately sized) box.
• If stored assembled or partially assembled, remember to protect
the fan head from dust.
FEATURES - OPERATIONS
FIGURE 3
D
FIGURE 4
F
G
H
A. THUMB SCREW
(FIGURE 1)
B. CORD CLIP
(FIGURE 2)
C. DUST FLAP
(FIGURE 3)
D. OSCILLATION BUTTON
(FIGURE 3)
E. SPEED CONTROL
BUTTONS (FIGURE 4)
F. FAN HOUSING
(FIGURE 4)
G. FRONT GRILL
(FIGURE 4)
H. BASE
(FIGURE 4)
C
E
HT30 fan 9/01
Advertisement
