Access The Product; Reset To Factory Default Settings - Axis Q6042-S PTZ Installation Manual

AXIS Q60-S Series
Mounting example (wall bracket sold separately)
1
Alignment indicator – multi-connector cable
2
Alignment indicator – camera
3
Flange
4
Multi-connector cable
5
Guide hole

Access the Product

Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/

Reset to Factory Default Settings

Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
Note
The installation and management software tools are available on the CD supplied with the
product and from the support pages on www.axis.com/techsup
29