Placing Calls; Place An Outside Call; Place An Intercom Call - NEC Xen TOPAZ Quick Reference Manual

Placing Calls

Place an Outside Call <Quick Access>
Trunk Key
Listen for Dial Tone before dialling a Telephone Number.
You can have function keys for Trunks or Trunk Groups. Ask your Supplier.
Place an Outside Call <Access by Code>
CALL
Listen for Dial Tone before dialling a Telephone Number.
In case the number of Trunk Group is more than 10, you should enter 3 digits (e.g. 011 : Group 11) after
dialling "804". Ask your Supplier more details.
Place an Intercom Call <Dial Access>
Extension Number
CALL
Pressing CALL key after dialling an extension number is also possible.
Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialling "1" changes voice/ring mode. (in case the destination is Key Telephone)
Telephone Number
? ? ? ?
0
Trunk Group No.
8 0 4
Trunk No. (e.g. Trunk 5)
8 0 5
? ? ?
?
0 5
4
Telephone Number
? ? ? ?