Solving Problems - Dell S199WFP User Manual

Flat panel monitor
Hide thumbs Also See for S199WFP:
Table of Contents

Advertisement

Back to Contents Page
 

Solving Problems

Dell™ S199WFP Flat Panel Monitor User's Guide
  Troubleshooting Your Monitor
  General Problems
  Product Specific Problems
  Troubleshooting Your Soundbar
 
CAUTION: Before you begin any of the procedures in this section, follow the
 
Troubleshooting Your Monitor
 Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog(blue
connector) cables from the back of computer.
3. Turn on the monitor.
The floating 'Dell Self-test Feature Check' dialog box should appear on-screen on a black background if the monitor cannot sense a video
signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of
the dialogs shown below will continuously scroll through the screen.  
4. This box also appears during normal system operation if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable, then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system; your monitor is functioning
properly.
OSD Warning Messages
One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.
1 : Auto Detect (Analog Input)
Cannot Display This Video Mode
Optimum Resolution 1440 x900 60Hz
Cannot Display This Video Mode
Optimum Resolution 1440 x900 60Hz
2: Analog Input
safety
instructions.
  or   
  or    
1 : Auto Detect (Digital Input)
 or 
Cannot Display This Video Mode
 
Optimum Resolution 1440 x900 60Hz
3:Digital Input
 or 
Cannot Display This Video Mode
 
Optimum Resolution 1440 x900 60Hz

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents