Power Management Modes; Pin Assignments - Dell S199WFP User Manual

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is
referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The
following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Normal operation (with Dell Soundbar active) Active
Normal operation
Active-off mode
Switch off
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed when in
Active-off mode.
or any key on keyboard or move mouse
or any key on keyboard or move mouse
This monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5V
Horizontal Sync Vertical Sync Video
Active
Active Active
Inactive Inactive
-
1 : Auto Detect (Analog Input)
In Power Save Mode
Press computer power button
2: Analog Input
In Power Save Mode
Press computer power button
Activate the computer and the monitor to gain access to the OSD.
Power Indicator Power Consumption
Active Blue
Active Blue
Blanked Amber
- - Off
1 : Auto Detect (Digital Input)
Press computer power button
or
or any key on keyboard or move mouse
or
Press computer power button
or any key on keyboard or move mouse
75 W (maximum)
32 W (typical)
Less than 2 W
Less than 1 W
In Power Save Mode
3: Digital Input
In Power Save Mode