Plug And Play Capability; Flat Panel - Dell S199WFP User Manual

10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
24-pin Digital-only DVI Connector
Note: Pin 1 is at the top right.
Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1-
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+
3 T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield
4 No Pin 12 No Pin
5 No Pin 13 No Pin
6 DDC Clock 14 +5V Power
7 DDC Data 15 Ground (for +5V)
8 No Connect 16 Hot Plug Detect

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can
select different settings if required.
General
Model number

Flat Panel

Screen type
Screen dimensions
Preset display area:
Horizontal
Vertical
Pixel pitch
Viewing angle
Luminance output
Contrast ratio
Faceplate coating
Backlight
Response Time
Pin Signal Assignment
17 T.M.D.S. Data 0-
18 T.M.D.S. Data 0+
20 No Pin
21 No Pin
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock +
24 T.M.D.S. Clock -
S199WFP
Active matrix - TFT LCD
19 inches wide(19-inch wide viewable image size)
408mm / 16.1inches (minimum)
255mm / 10.0 inches (minimum)
~ 0.2850mm
160° (vertical) typ, 160° (horizontal) typ
300 CD/m ²(typ)
1000 to 1 (typ)
ARC-Glare (2H)
CCFL (4) edgelight system
5ms typical