Table of Contents
Advertisement
29
Battery Harness
Motor Harness
Connector
• Install the battery into the battery compartment (see step
2, page 19 in the Battery Installation section).
• Join the battery harness connector to the motor harness.
Push firmly to snap the connectors together.
Note: If the motor harness connector will not fit into the
battery harness connector, turn it over and try again! Do
not force the motor harness connector into the battery
harness connector.
30
Power Button
• Test to be sure you have assembled the power button
harness correctly.
• Press the power button. The vehicle should move forward.
• If the vehicle does not move, you have probably assem-
bled the power button harness incorrectly. Please re-read
assembly steps 1-7 and 24-25.
Assembly
Connector
31
Handlebars
Handgrip
• Fit a handgrip on the end of each handlebar.
Hint: If it is difficult to slide the handgrips onto the handle-
bars, moisten the inside of the handgrips with water.
32
Lock Fastener
LOCKED
• Fit the tab on the seat into the slot in the gas tank.
• Using a slotted screwdriver, turn the lock fastener
to the locked position
IMPORTANT! Keep the lock fastener locked at all times
to prevent children from accessing the vehicle battery.
16
Handgrip
Seat
Gas Tank
Tab
Lock Fastener
UNLOCKED
1
/
.
turn
4
Advertisement
Table of Contents
