Table of Contents
Advertisement
24
Motor Harness
• Plug the power button harness into the motor harness.
Push firmly to snap the connectors together.
25
Bend
Wire
Down
• Fit the connectors between the tabs inside the vehicle.
• Bend the wires down (90˚ angle).
26
Back Fender
• Fit the motor harness connector up through the square
hole in the bottom of the back fender.
Assembly
Power Button
Harness
Tabs
Connectors
Motor Harness
Connector
27
Back Fender
• Carefully fit the back fender onto the vehicle. DO NOT
pinch the motor harness.
• Insert four screws through the back fender and into
the vehicle, as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
28
Back Fender
• With the back end facing you, insert eight more screws
through the back fender and into the vehicle, as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
15
Motor Harness
Back View
Advertisement
Table of Contents
