Internal Fan-Fold Guide; Side Door With Keylock; Paper Sensor; Thick Media Printhead - Intermec EasyCoder PM4i User Manual

Chapter 8—Options

Internal Fan-Fold Guide

This guide facilitates media load from an external supply to the rear of
the printer and provides superior guiding of the media. It can not be
used in connection with peel-off (self-strip) operation and cannot be
combined with a label slack absorber, which may restrict the maximum
print speed somewhat.

Side Door with Keylock

If the media is valuable or sensitive, such as tickets, you can install a side
door that can be locked with a key. Can be installed by the operator.

Thick Media Printhead

As standard, the printer is fi tted with an 8 dots/mm (203.2 dots/inch)
thermal printhead for a media thickness of max. 175µm (7 mils). There
is also an optional printhead for 170-220 µm (6.6-8.7 mils) media thick-
ness. The printhead can easily be replaced by the operator as described in
Chapter 11.

Interface Boards

A number of interface boards are available for use with the EasyCoder
PM4i printer. The interface boards are either factory-fi tted or can easily
be fi tted by an authorized service technician.
The EasyCoder PM4i can accommodate one EasyLAN interface board
plus one IEEE 1284 Parallel Interface Board.
EasyLAN boards:
• EasyLAN Ethernet Interface
• EasyLAN Wireless Interface
62 Intermec EasyCoder PM4i—User's Guide (IPL version)