Data Dump; Memory Reset - Intermec EasyCoder PM4i User Manual

Chapter 6—Setting Up the Printer
Format
The Format Label contains a single format that you can use to evaluate
the print quality of a particular format. This option prints labels for all
the formats stored in the printer's memory.
Page
The Page Label tests the ability of the printer to receive and print single
or multiple pages of label data that is sent from the host. This option
prints labels for all the pages stored in the printer's memory.
UDC
The UDC Label tests the ability of the printer to receive and print single
or multiple user-defi ned characters (bitmap graphics) that are sent from
the host. This option prints labels for all the UDCs stored in the printer's
memory.
Font
The Font Label contains all the characters in a single font. This option
prints labels for all the user-defi ned fonts (UDF) stored in the printer's
memory.

Data Dump

If data dump is enabled by selecting the "Yes" option, the printer prints
all data and protocol characters received on the serial port. An ASCII and
hexadecimal representation of each character is printed.

Memory Reset

There are two options. The memory will be reset to factory default
as soon as an option has been selected and <Enter> is pressed. Select
between "All", which resets the entire memory and "Confi guration"
which just resets the confi guration part of the memory.
46 Intermec EasyCoder PM4i—User's Guide (IPL version)