Installing Printer Firmware
PB2 Mobile Printer User's Guide
The PB2 is compatible with the XSim printer language, as well as with
a subset of ESC/P commands. For more information, see one of these
manuals:
•
XSim Programmer's Reference Manual
•
ESC/P Programmer's Reference Manual
Intermec's Printing Resource Kit provides tools for developing mobile
printing solutions for the PB2. For more information, visit
www.intermec.com
Software > Developer Library > Developer Resource Kits.
Note: You can also download SDKs from
help develop mobile printing solutions for certain language sets:
•
PrinterCE SDK
PrinterCE.NetCF SDK
•
•
PocketHTMLprint SDK
When you install printer firmware, you also need to configure your
printer hardware. Before getting started, make sure that:
•
your printer is set to serial mode (all DIP switches are off).
•
the paper roll is properly seated on your printer.
•
your printer is connected to your host PC with a serial cable.
•
Communications LED is on (green).
•
you have the Tera Term application installed on your host PC.
Tera Term is a free, open-source terminal emulator program
available from the Internet.
and choose Products > Applications &
www.fieldsoftware.com
to
31