Sharp ER-A440 Service Manual page 4

Distance between dots:
Journal near end sensor:
Print speed:
Paper feed speed:
Reliability:
Validation form sensor:
2) Printing area
Receipt/journal
3.56 3.56
37.87
44.5± 0.5
RECEIPT
Validation form
70
3) Paper
Paper roll dimensions: 44.5 0.5mm in width, 83mm in diameter
Paper quality: Journal
Bond paper (paper thickness: 0.06 to
0.09mm, paper weight: 52.3 to 64g/m
Validation form
Thickness: 0.07 to 0.14mm
Size: 130mm or more W
0.353 mm (H) 0.353 mm (W)
Service route option
Approx. 3.0 lines/sec.
Receipt – Approx. 30 lines/sec.
Journal – Approx. 30 lines/sec.
MCBF – 4 million lines (excluding the
print head)
Head life – 50 million characters
(at 4 dots/1 character/
1 pin)
Not setup
87.08
3.56
37.87
4.2
44.5± 0.5
JOURNAL
Fig. 5-1
87.08 (PRINT AREA)
130 ~ 210
Fig. 5-2
70mm or more H
4) Inking
Ink supply system:
Form:
Specification:
Ribbon life:
Print color:
5) Logo stamp: None
6) Cutter
Method: Manual
6. Drawer
1) Specification
(1) Drawer box and drawer
3.56
Model name
Size
Color
Material
Bell
Release lever
Drawer open sensor
2) Money case
Separation from the drawer
Separation of the coin com-
partments from the money
case
Unit : mm
Bill separator
Number of compartments
20
3) Lock
Unit : mm
Location of the lock
Method of locking
and unlocking
Key No.
2
)
1 – 3
Ink ribbon
Cartridge/Endless ribbon
Material – Nylon
Approx. 6 million characters
Purple (single color)
SK-423
420 (W) 427 (L: included lock key)
112 (H: included rubber leg)
GRAY 368
Metal
—
Standard equipment; Situated at the bottom
Standard equipment
For "U" version
Allowed
Disallowed
—
5B/5C
For "U" Version
Bill compartments
Bill separator
Coin compartments
5B/5C
Front
Locking:
Unlocking:
SK1-1
For "A" version
Allowed
Disallowed
YES
4B/8C
For "A" Version
5B/8C
Insert the drawer lock key into
the lock and turn it 90 degrees
counterclockwise.
Insert the drawer lock key into
the lock and turn it 90 degrees
clockwise.